DIESEL GEL SYSTEM v2.0.0.10

INSTALL
Copy FS25_DieselGelSystem.zip into your FarmingSimulator2025/mods folder.

BEHAVIOR
- Only vehicles with a DIESEL consumer fill unit are affected.
- Actual engine torque begins dropping around 16 F (-8.9 C).
- Diesel gelling begins at 10 F (-12.2 C) and accelerates in deeper cold.
- Physical engine torque progressively falls to a minimum of 40%.
- The HUD displays only the block temperature.
- At 16 F or colder, a one-time warning recommends parking the vehicle somewhere warm.
- Once enough gel has accumulated, a manual start attempt cranks briefly, stops, and reports that the fuel is gelled.
- A running, warm engine thaws the fuel system.
- Temperatures above 10 F stop new gelling and gradually thaw existing gel.
- Shelter detected through the native indoor mask slowly lowers gel by 3% per game hour.
- A full anti-gel treatment adds another 12% thaw per game hour and becomes less effective as it is diluted.
- Gel level is saved per vehicle and synchronized from the server.
- Right Shift+A purchases a $25 anti-gel treatment. Refueling dilutes it.
- Gel power loss rebuilds the cached motor physics for real torque reduction.
- The block-temperature readout is positioned above the circular minimap.

TESTING
With the developer console enabled, enter a diesel vehicle and use:
  gsDieselGelSet 50
to test power reduction, or:
  gsDieselGelSet 90
to test the manual and automatic engine-start block. Use gsDieselGelSet 0 to
clear it. Ambient temperature comes from the active weather system. Enter a
diesel vehicle to see the status line when gel level exceeds 5%.

Watch log.txt for lines beginning with [DieselGelSystem].
